All MIBs › CISCO-IP-LOCAL-POOL-MIB › cIpLocalPoolStatHiWaterUsedAddrs
cIpLocalPoolStatHiWaterUsedAddrs
Module: CISCO-IP-LOCAL-POOL-MIB
OID (symbolic): CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatHiWaterUsedAddrs
OID (numeric): 1.3.6.1.4.1.9.9.326.1.3.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object contains the high water mark of used addresses in an IP local pool since pool creation, since the system was restarted, or since this object was reset, whichever occurred last. This object can only be set to zero, and by doing so, it is reset to the value of cIpLocalPoolStatInUseAddrs.
Since the number of addresses in a pool can be reduced (e.g. by deleting one of its ranges), the value of this object may be greater than the sum of cIpLocalPoolStatFreeAddrs and cIpLocalPoolStatInUseAddrs.
What is cIpLocalPoolStatHiWaterUsedAddrs?
Tracks the high-water mark (peak) number of addresses used from a local IP pool since it was created, since the system last restarted, or since this counter was last reset; writing zero to it resets the mark.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.3 snmpwalk -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatHiWaterUsedAddrs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.3.1 snmpget -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatHiWaterUsedAddrs.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.3.1 i <value>
Start monitoring Cisco VPN/dial access gateways and broadband aggregation routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatHiWaterUsedAddrs OID value, configure state conditions and alerts, and monitor any Cisco VPN/dial access gateways and broadband aggregation routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.326 | ciscoIpLocalPoolMIB | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1 | ciscoIpLocalPoolMIBObjects | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3 | cIpLocalPoolStats | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3.1 | cIpLocalPoolStatsTable | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3.1.1 | cIpLocalPoolStatsEntry | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3.1.1.3 | cIpLocalPoolStatHiWaterUsedAddrs | CISCO-IP-LOCAL-POOL-MIB |