CISCO-IP-LOCAL-POOL-MIB :: cIpLocalPoolPercentAddrThldLo

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IP-LOCAL-POOL-MIB › cIpLocalPoolPercentAddrThldLo

cIpLocalPoolPercentAddrThldLo

Module: CISCO-IP-LOCAL-POOL-MIB

OID (symbolic): CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldLo

OID (numeric): 1.3.6.1.4.1.9.9.326.1.3.1.1.6

Node type: OBJECT-TYPE

Type: CIpLocalPoolPercentage

Access: read-write

Description: When the percentage of used addresses in an IP local pool falls below this threshold value, a cilpPercentAddrUsedLoNotif notification will be generated. Once the notification is generated, it will be disarmed and it will not be generated again until the number of used addresses equals or exceeds the value indicated by cIpLocalPoolPercentAddrThldHi.

The value of this object should never be greater than the value of cIpLocalPoolPercentAddrThldHi.

What is cIpLocalPoolPercentAddrThldLo?

A configurable low percentage threshold for address usage in an IP local pool; when the percentage of used addresses falls below this value, a cilpPercentAddrUsedLoNotif notification is triggered.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.6
snmpwalk -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldLo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.6.1
snmpget -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldLo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.6.1 s <value>

Start monitoring Cisco VPN/dial access gateways and broadband aggregation routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldLo OID value, configure state conditions and alerts, and monitor any Cisco VPN/dial access gateways and broadband aggregation routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.326ciscoIpLocalPoolMIBCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1ciscoIpLocalPoolMIBObjectsCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3cIpLocalPoolStatsCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3.1cIpLocalPoolStatsTableCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3.1.1cIpLocalPoolStatsEntryCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3.1.1.6cIpLocalPoolPercentAddrThldLoCISCO-IP-LOCAL-POOL-MIB