CISCO-IP-LOCAL-POOL-MIB :: cIpLocalPoolPercentAddrThldHi

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IP-LOCAL-POOL-MIB › cIpLocalPoolPercentAddrThldHi

cIpLocalPoolPercentAddrThldHi

Module: CISCO-IP-LOCAL-POOL-MIB

OID (symbolic): CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldHi

OID (numeric): 1.3.6.1.4.1.9.9.326.1.3.1.1.7

Node type: OBJECT-TYPE

Type: CIpLocalPoolPercentage

Access: read-write

Description: When the percentage of used addresses in an IP local pool is equal or exceeds this threshold value, a cilpPercentAddrUsedHiNotif notification will be generated. Once the notification is generated, it will be disarmed and it will not be generated again until the number of used addresses falls below the value indicated by cIpLocalPoolPercentAddrThldLo.

The value of this object should never be smaller than the value of cIpLocalPoolPercentAddrThldLo.

What is cIpLocalPoolPercentAddrThldHi?

A configurable high percentage threshold for address usage in an IP local pool; when the percentage of used addresses reaches or exceeds this value, a cilpPercentAddrUsedHiNotif notification is triggered.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.7
snmpwalk -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldHi

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.7.1
snmpget -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldHi.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.7.1 s <value>

Start monitoring Cisco VPN/dial access gateways and broadband aggregation routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolPercentAddrThldHi OID value, configure state conditions and alerts, and monitor any Cisco VPN/dial access gateways and broadband aggregation routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.326ciscoIpLocalPoolMIBCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1ciscoIpLocalPoolMIBObjectsCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3cIpLocalPoolStatsCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3.1cIpLocalPoolStatsTableCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3.1.1cIpLocalPoolStatsEntryCISCO-IP-LOCAL-POOL-MIB
1.3.6.1.4.1.9.9.326.1.3.1.1.7cIpLocalPoolPercentAddrThldHiCISCO-IP-LOCAL-POOL-MIB