All MIBs › CISCO-IMAGE-UPGRADE-MIB › ciuUpgradeMiscAutoCopy
ciuUpgradeMiscAutoCopy
Module: CISCO-IMAGE-UPGRADE-MIB
OID (symbolic): CISCO-IMAGE-UPGRADE-MIB::ciuUpgradeMiscAutoCopy
OID (numeric): 1.3.6.1.4.1.9.9.360.1.1.10.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Specifies whether or not the images on the active supervisor will be copied to the standby supervisor, if the standby supervisor exists. If the standby supervisor does not exist, the setting of this object to 'true' will not have any effect and no image copy will be done.
ciuImageURITable lists all the images for the supervisor cards as well as the line cards.
If this object is set to 'true', all the images pointed to by the instances of ciuImageURI will be automatically copied to the standby supervisor.
For example, assume that the ciuImageURITable looks like below -
entPhysicalIndex ciuImageVariableName ciuImageURI
25 'system' bootflash://image.bin 25 'kickstart' slot0://boot.bin 26 'ilce' bootflash://linecard.bin
So, if the ciuUpgradeMiscAutoCopy is 'true', then bootflash://image.bin from the active supervisor will be copied to the bootflash://image.bin on the standby supervisor; slot0://boot.bin will be copied to the slot0://boot.bin on the standby supervisor etc.
If this object is set to 'false' then this copying of the images will not be done.
What is ciuUpgradeMiscAutoCopy?
A read-write setting controlling whether software images on the active supervisor are automatically copied to the standby supervisor, if one is present.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.360.1.1.10.1 snmpwalk -v2c -c public <target> CISCO-IMAGE-UPGRADE-MIB::ciuUpgradeMiscAutoCopy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.360.1.1.10.1.1 snmpget -v2c -c public <target> CISCO-IMAGE-UPGRADE-MIB::ciuUpgradeMiscAutoCopy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.360.1.1.10.1.1 s <value>
Start monitoring Cisco modular chassis platforms (ASR/Nexus-class) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IMAGE-UPGRADE-MIB::ciuUpgradeMiscAutoCopy OID value, configure state conditions and alerts, and monitor any Cisco modular chassis platforms (ASR/Nexus-class) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.360 | ciscoImageUpgradeMIB | CISCO-IMAGE-UPGRADE-MIB |
| 1.3.6.1.4.1.9.9.360.1 | ciscoImageUpgradeMIBObjects | CISCO-IMAGE-UPGRADE-MIB |
| 1.3.6.1.4.1.9.9.360.1.1 | ciscoImageUpgradeConfig | CISCO-IMAGE-UPGRADE-MIB |
| 1.3.6.1.4.1.9.9.360.1.1.10 | ciscoImageUpgradeMisc | CISCO-IMAGE-UPGRADE-MIB |
| 1.3.6.1.4.1.9.9.360.1.1.10.1 | ciuUpgradeMiscAutoCopy | CISCO-IMAGE-UPGRADE-MIB |