CISCO-IKE-FLOW-MIB :: cifIkeNotifCntlInNewGrpRejected

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IKE-FLOW-MIBcifIkeNotifCntlInNewGrpRejected

cifIkeNotifCntlInNewGrpRejected

Module: CISCO-IKE-FLOW-MIB

OID (symbolic): CISCO-IKE-FLOW-MIB::cifIkeNotifCntlInNewGrpRejected

OID (numeric): 1.3.6.1.4.1.9.9.429.1.3.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The generation of the 'ciscoIkeFlowInNewGrpRejected' notification is enabled if and only if this object has the value 'true'.

What is cifIkeNotifCntlInNewGrpRejected?

This is a read-write on/off switch: setting it to 'true' enables the ciscoIkeFlowInNewGrpRejected notification, which fires whenever a remotely-initiated New Group Mode exchange is rejected, per its description. An admin who wants to be alerted the moment a peer's legacy custom-group request gets refused - rather than having to poll cifIkeGlobalInNewGrpRejectReqs periodically - would set this to true and configure a trap receiver. Leaving it at 'false' means those rejection events happen silently and only show up if someone later checks the counter.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.429.1.3.1
snmpwalk -v2c -c public <target> CISCO-IKE-FLOW-MIB::cifIkeNotifCntlInNewGrpRejected

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.429.1.3.1.1
snmpget -v2c -c public <target> CISCO-IKE-FLOW-MIB::cifIkeNotifCntlInNewGrpRejected.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.429.1.3.1.1 s <value>

Start monitoring Cisco IOS routers and VPN concentrators terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IKE-FLOW-MIB::cifIkeNotifCntlInNewGrpRejected OID value, configure state conditions and alerts, and monitor any Cisco IOS routers and VPN concentrators terminating IPsec tunnels from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.429ciscoIkeFlowMIBCISCO-IKE-FLOW-MIB
1.3.6.1.4.1.9.9.429.1ciscoIkeFlowMIBObjectsCISCO-IKE-FLOW-MIB
1.3.6.1.4.1.9.9.429.1.3cifIkeNotifControlCISCO-IKE-FLOW-MIB
1.3.6.1.4.1.9.9.429.1.3.1cifIkeNotifCntlInNewGrpRejectedCISCO-IKE-FLOW-MIB