CISCO-IF-THRESHOLD-MIB :: cifthThresholdFiredNotifyEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IF-THRESHOLD-MIB › cifthThresholdFiredNotifyEnable

cifthThresholdFiredNotifyEnable

Module: CISCO-IF-THRESHOLD-MIB

OID (symbolic): CISCO-IF-THRESHOLD-MIB::cifthThresholdFiredNotifyEnable

OID (numeric): 1.3.6.1.4.1.9.9.218.1.3.1

Node type: OBJECT-TYPE

Type: CifthThresholdSeverityOrZero

Access: read-write

Description: This object specifies the minimum severity threshold governing the generation of cifthIfThresholdFired and cifthIfThresholdCleared notifications. For example, if the value of this object is set to 'degrade', then the agent generates these notifications if and only if the severity of the threshold being exceeded is 'degrade' or 'fail'. When the value is other than '0', the generation of cifthTemplateIfStatusChange notifications is also enabled. The value of '0' disables the generation of all notifications. By default, the value of this object is set to '0'.

What is cifthThresholdFiredNotifyEnable?

This read-write object sets the minimum severity level at which cifthIfThresholdFired and cifthIfThresholdCleared notifications are generated by the agent.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.218.1.3.1
snmpwalk -v2c -c public <target> CISCO-IF-THRESHOLD-MIB::cifthThresholdFiredNotifyEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.218.1.3.1.1
snmpget -v2c -c public <target> CISCO-IF-THRESHOLD-MIB::cifthThresholdFiredNotifyEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.218.1.3.1.1 s <value>

Start monitoring Cisco routers and switches (interface threshold templates) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IF-THRESHOLD-MIB::cifthThresholdFiredNotifyEnable OID value, configure state conditions and alerts, and monitor any Cisco routers and switches (interface threshold templates) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.218ciscoIfThresholdMIBCISCO-IF-THRESHOLD-MIB
1.3.6.1.4.1.9.9.218.1cIfThresholdMIBObjectsCISCO-IF-THRESHOLD-MIB
1.3.6.1.4.1.9.9.218.1.3cifthIfThresholdFiredGroupCISCO-IF-THRESHOLD-MIB
1.3.6.1.4.1.9.9.218.1.3.1cifthThresholdFiredNotifyEnableCISCO-IF-THRESHOLD-MIB