CISCO-IF-LOOPBACK-MIB :: cifLLoopbackStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IF-LOOPBACK-MIB › cifLLoopbackStatus

cifLLoopbackStatus

Module: CISCO-IF-LOOPBACK-MIB

OID (symbolic): CISCO-IF-LOOPBACK-MIB::cifLLoopbackStatus

OID (numeric): 1.3.6.1.4.1.9.9.9399.1.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object shows the current status of loopback. The value for this object is valid only when cifLRowStatus is active(1).

Possible values for this object:

completed(1): Loopback is successfully completed.

inProgress(2): loop up or loop down in progress.

clockOutOfSync(3): When the send and receive clocks are not synchronized.

failed(4) : Loopback failed.

What is cifLLoopbackStatus?

This read-only object reports the current status of a configured loopback test, such as whether it is in progress or has completed successfully, and is only meaningful when the corresponding row is active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.9399.1.1.1.1.2
snmpwalk -v2c -c public <target> CISCO-IF-LOOPBACK-MIB::cifLLoopbackStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.9399.1.1.1.1.2.1
snmpget -v2c -c public <target> CISCO-IF-LOOPBACK-MIB::cifLLoopbackStatus.1

Start monitoring Cisco routers (DS1/DS3/DS0 serial interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IF-LOOPBACK-MIB::cifLLoopbackStatus OID value, configure state conditions and alerts, and monitor any Cisco routers (DS1/DS3/DS0 serial interfaces) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.9399ciscoIfLoopbackMIBCISCO-IF-LOOPBACK-MIB
1.3.6.1.4.1.9.9.9399.1ciscoIfLoopbackMIBObjectsCISCO-IF-LOOPBACK-MIB
1.3.6.1.4.1.9.9.9399.1.1ciscoIfLoopbackConfigCISCO-IF-LOOPBACK-MIB
1.3.6.1.4.1.9.9.9399.1.1.1cifLConfTableCISCO-IF-LOOPBACK-MIB
1.3.6.1.4.1.9.9.9399.1.1.1.1cifLConfEntryCISCO-IF-LOOPBACK-MIB
1.3.6.1.4.1.9.9.9399.1.1.1.1.2cifLLoopbackStatusCISCO-IF-LOOPBACK-MIB