CISCO-IETF-VRRP-MIB :: cVrrpOperationsVirtualMacAddr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IETF-VRRP-MIB › cVrrpOperationsVirtualMacAddr

cVrrpOperationsVirtualMacAddr

Module: CISCO-IETF-VRRP-MIB

OID (symbolic): CISCO-IETF-VRRP-MIB::cVrrpOperationsVirtualMacAddr

OID (numeric): 1.3.6.1.4.1.9.10.999.1.7.1.3

Node type: OBJECT-TYPE

Type: MacAddress

Access: read-only

Description: The virtual MAC address of the virtual router. Although the value of this object can be derived from the 'cVrrpOperationsVrId' object, i.e., 00-00-5E-00-01-(VRID) for IPv4 and 00-00-5E-00-02-(VRID) for IPv6, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP notifications.

What is cVrrpOperationsVirtualMacAddr?

This is the virtual MAC address associated with this VRRP virtual router, which technically could be computed from the VRID (00-00-5E-00-01-VRID for IPv4 or 00-00-5E-00-02-VRID for IPv6) but is exposed directly here for convenience so management applications and trap payloads don't need to do that derivation themselves. It's useful for confirming a specific gratuitous ARP or ND observed on the wire actually corresponds to this virtual router's expected MAC, which matters when diagnosing a client failing to fail over correctly after a master transition. If packet captures show ARP replies for the virtual IP using a MAC that doesn't match this object's value, something is impersonating or misconfiguring the virtual router's identity on the LAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.999.1.7.1.3
snmpwalk -v2c -c public <target> CISCO-IETF-VRRP-MIB::cVrrpOperationsVirtualMacAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.999.1.7.1.3.1
snmpget -v2c -c public <target> CISCO-IETF-VRRP-MIB::cVrrpOperationsVirtualMacAddr.1

Start monitoring Cisco routers/Layer 3 switches (VRRP gateways) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-VRRP-MIB::cVrrpOperationsVirtualMacAddr OID value, configure state conditions and alerts, and monitor any Cisco routers/Layer 3 switches (VRRP gateways) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
1.3.6.1.4.1.9.10.999ciscoCableDsgIfMIBCISCO-CABLE-DSG-IF-MIB
1.3.6.1.4.1.9.10.999.1ccdsgIfCaVendorCISCO-CABLE-DSG-IF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.10.999.1.7cVrrpOperationsTableCISCO-IETF-VRRP-MIB
1.3.6.1.4.1.9.10.999.1.7.1cVrrpOperationsEntryCISCO-IETF-VRRP-MIB
1.3.6.1.4.1.9.10.999.1.7.1.3cVrrpOperationsVirtualMacAddrCISCO-IETF-VRRP-MIB