CISCO-GPRS-GTP-MIB :: cgprsGtpT3ResponseTimer

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-GPRS-GTP-MIB › cgprsGtpT3ResponseTimer

cgprsGtpT3ResponseTimer

Module: CISCO-GPRS-GTP-MIB

OID (symbolic): CISCO-GPRS-GTP-MIB::cgprsGtpT3ResponseTimer

OID (numeric): 1.3.6.1.4.1.9.10.48.1.1.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The T3-RESPONSE timer for retransmission. This timer is started by GGSN, upon the transmission of a signalling request message; it is used for message retransmission purposes, in the event that no response is received by the time the timer expires. Note that the total wait time (cgprsGtpT3ResponseTimer*cgprsGtpN3Requests) must be shorter than the Mobile System (MS) wait time between retries of Attach and RA Updates; The product of cgprsGtpT3ResponseTimer and cgprsGtpN3requests must be less than the minimum value of the Attach Timer(T3310) and the Routing Area Update timer(T3330). The cgprsGtpT3ResponseTimer timer, according to the standards, recommends an adaptive back-off mechanism, using increasing values, e.g., 1, 2, 4, and 8 seconds.

What is cgprsGtpT3ResponseTimer?

Configures the T3 response timer, the interval a GSN waits for a response to a GTP signalling request before considering it timed out.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.48.1.1.1.2
snmpwalk -v2c -c public <target> CISCO-GPRS-GTP-MIB::cgprsGtpT3ResponseTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.48.1.1.1.2.1
snmpget -v2c -c public <target> CISCO-GPRS-GTP-MIB::cgprsGtpT3ResponseTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.48.1.1.1.2.1 i <value>

Start monitoring Cisco GGSN/SGSN packet-core gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-GPRS-GTP-MIB::cgprsGtpT3ResponseTimer OID value, configure state conditions and alerts, and monitor any Cisco GGSN/SGSN packet-core gateways from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.48ciscoGprsGtpMIBCISCO-GPRS-GTP-MIB
1.3.6.1.4.1.9.10.48.1ciscoGprsGtpMIBObjectsCISCO-GPRS-GTP-MIB
1.3.6.1.4.1.9.10.48.1.1ciscoGprsGtpConfigCISCO-GPRS-GTP-MIB
1.3.6.1.4.1.9.10.48.1.1.1cgprsGtpGeneralConfigCISCO-GPRS-GTP-MIB
1.3.6.1.4.1.9.10.48.1.1.1.2cgprsGtpT3ResponseTimerCISCO-GPRS-GTP-MIB