All MIBs › CISCO-FIBRECHANNEL-MIB › coiFibreChanControllerAlarmStatus
coiFibreChanControllerAlarmStatus
Module: CISCO-FIBRECHANNEL-MIB
OID (symbolic): CISCO-FIBRECHANNEL-MIB::coiFibreChanControllerAlarmStatus
OID (numeric): 1.3.6.1.4.1.9.9.1053.1.1.1.1.4
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object indicates the current defect status of the Fibre Channel controller. Valid values are - noAlarm(0): No Alarm. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS alarm condition is detected on the Fibre Channel Recieve side. syncLoss(2): Sync Loss alarm. pcsErr(3): PCS (Physical Coding Sublayer) Error alarm. hiBer(4): high BER(Block Errored Seconds Ratio) alarm. localFault(5): Local Fault alarm. remoteFault(6): Remote Fault alarm. nos(7): NOS (Not-Operational primitive Sequence). squelch(8): Squelch alarm.
What is coiFibreChanControllerAlarmStatus?
Reports the current defect/alarm status of a Fibre Channel controller, such as loss of signal or no alarm, indicating hardware or signal-level problems on the link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.1053.1.1.1.1.4 snmpwalk -v2c -c public <target> CISCO-FIBRECHANNEL-MIB::coiFibreChanControllerAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.1053.1.1.1.1.4.1 snmpget -v2c -c public <target> CISCO-FIBRECHANNEL-MIB::coiFibreChanControllerAlarmStatus.1
Start monitoring Cisco MDS/Nexus Fibre Channel switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FIBRECHANNEL-MIB::coiFibreChanControllerAlarmStatus OID value, configure state conditions and alerts, and monitor any Cisco MDS/Nexus Fibre Channel switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.1053 | ciscoFibreChanMIB | CISCO-FIBRECHANNEL-MIB |
| 1.3.6.1.4.1.9.9.1053.1 | ciscoFibreChanMIBObjects | CISCO-FIBRECHANNEL-MIB |
| 1.3.6.1.4.1.9.9.1053.1.1 | coiFibreChanController | CISCO-FIBRECHANNEL-MIB |
| 1.3.6.1.4.1.9.9.1053.1.1.1 | coiFibreChanControllerTable | CISCO-FIBRECHANNEL-MIB |
| 1.3.6.1.4.1.9.9.1053.1.1.1.1 | coiFibreChanControllerEntry | CISCO-FIBRECHANNEL-MIB |
| 1.3.6.1.4.1.9.9.1053.1.1.1.1.4 | coiFibreChanControllerAlarmStatus | CISCO-FIBRECHANNEL-MIB |