CISCO-FCSP-MIB :: cfcspMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-FCSP-MIB › cfcspMode

cfcspMode

Module: CISCO-FCSP-MIB

OID (symbolic): CISCO-FCSP-MIB::cfcspMode

OID (numeric): 1.3.6.1.4.1.9.9.391.1.1.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The FC-SP mode of this interface.

If off(1), port would never initiate FC-SP authentication exchange and send reject to any FC-SP authentication message started from other end.

If autoPassive(2), a port would not initiate any FC-SP authentication exchange; but would always take part in FC-SP authentication exchange initiated on this interface by other devices.

If autoActive(3), a port would always try to initiate FC-SP authentication exchange after ESC. If otherside does not support FC-SP authentication, port will still be brought up. If the authentication fails, the port will not be brought up.

If on(4), port would always try to initiate FC-SP authentication exchange and authentication is done before the port becomes up. If otherside does not support FC-SP authentication or if authentication fails, port will not be brought up.

What is cfcspMode?

Configures the FC-SP (Fibre Channel Security Protocol) authentication mode on an interface, controlling whether the port initiates or passively responds to authentication exchanges.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.391.1.1.1.1.1
snmpwalk -v2c -c public <target> CISCO-FCSP-MIB::cfcspMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.391.1.1.1.1.1.1
snmpget -v2c -c public <target> CISCO-FCSP-MIB::cfcspMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.391.1.1.1.1.1.1 i <value>

Start monitoring Cisco MDS series Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FCSP-MIB::cfcspMode OID value, configure state conditions and alerts, and monitor any Cisco MDS series Fibre Channel SAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.391ciscoFcspMIBCISCO-FCSP-MIB
1.3.6.1.4.1.9.9.391.1ciscoFcspMIBObjectsCISCO-FCSP-MIB
1.3.6.1.4.1.9.9.391.1.1cfcspConfigCISCO-FCSP-MIB
1.3.6.1.4.1.9.9.391.1.1.1cfcspIfTableCISCO-FCSP-MIB
1.3.6.1.4.1.9.9.391.1.1.1.1cfcspIfEntryCISCO-FCSP-MIB
1.3.6.1.4.1.9.9.391.1.1.1.1.1cfcspModeCISCO-FCSP-MIB