CISCO-FC-ROUTE-MIB :: fcRouteVerifyLock

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-FC-ROUTE-MIB › fcRouteVerifyLock

fcRouteVerifyLock

Module: CISCO-FC-ROUTE-MIB

OID (symbolic): CISCO-FC-ROUTE-MIB::fcRouteVerifyLock

OID (numeric): 1.3.6.1.4.1.9.9.284.1.1.9

Node type: OBJECT-TYPE

Type: TestAndIncr

Access: read-write

Description: This object is used to facilitate the verify action performed using 'fcRouteVerifyAction' by multiple managers. The procedure to perform the action by the NMS is as follows:

1. Retrieve the value of fcRouteVerifyLock.

2. Set the value of fcRouteVerifyLock to the retrieved value, and in the same PDU provide the following values: fcRouteVerifyAction to 'verify(2)' fcRouteVerifyType,fcRouteVerifyVsanID, fcRouteVerifyRouteType and fcRouteVerifyModule. Note, fcRouteVerifyModule is relevent only if fcRouteVerifyType is either 'fibShadow(2)' or fibHardware(3).

3. If the set fails repeat steps 1-2.

4. Retrieve the value of fcRouteVerifyLock and fcRouteVerifyResult in the same pdu.

5. If 'fcRouteVerifyLock' value is not one greater than the retrieved value of 'fcRouteVerifyLock' in step-1 than repeat steps 1-4.

What is fcRouteVerifyLock?

This read-write object provides a locking mechanism so multiple network management stations can coordinate exclusive use of the Fibre Channel route verify action without conflicting with one another.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.284.1.1.9
snmpwalk -v2c -c public <target> CISCO-FC-ROUTE-MIB::fcRouteVerifyLock

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.284.1.1.9.1
snmpget -v2c -c public <target> CISCO-FC-ROUTE-MIB::fcRouteVerifyLock.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.284.1.1.9.1 s <value>

Start monitoring Cisco MDS/Nexus Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FC-ROUTE-MIB::fcRouteVerifyLock OID value, configure state conditions and alerts, and monitor any Cisco MDS/Nexus Fibre Channel SAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.284ciscoFcRouteMIBCISCO-FC-ROUTE-MIB
1.3.6.1.4.1.9.9.284.1ciscoFcRouteMIBObjectsCISCO-FC-ROUTE-MIB
1.3.6.1.4.1.9.9.284.1.1fcRouteConfigCISCO-FC-ROUTE-MIB
1.3.6.1.4.1.9.9.284.1.1.9fcRouteVerifyLockCISCO-FC-ROUTE-MIB