Description: Gives the current configuration of the SCA ASIC.

quarterBandwidth (0) -- 1/4th of the full bandwidth is supported per slot by the switch. halfBandwidth (1) -- 1/2th of the full bandwidth is supported per slot by the switch. fullBandwidth (2) -- Full bandwidth is supported per slot by the switch. enableParity (3) -- Parity handling by SCA is enabled. priMcast (4) -- Priority of Multicast requests is greater then Unicast requests. priUnicast (5) -- Priority of Unicast requests is greater then Multicast requests. priAlternating (6) -- Alternate the priority between pri-mcast and pri-unicast modes every cell clock. earlyIntrOnLOS (7) -- Cause early interrupt on loss-of-sync error. noEarlyIntrOnLOS (8) -- Allow time to resync on loss-of-sync error. forceXbarParityXer (9) -- Force bad parity on xbar on every cell clock. forceGrantParityXer (10) -- Force bad partity on grant to every line card. unicastAcceptMode (11) -- Enable unicast accept pointer updating only on cell periods when Unicast has higher priority over multicast. forceXbarCrcOnCtlLink0 (12)-- Force CRC error on Xbar control link 0. forceXbarCrcOnCtlLink0 (13)-- Force CRC error on Xbar control link 1. forceXbarCrcOnCtlLink0 (14)-- Force CRC error on Xbar control link 2. forceXbarCrcOnCtlLink0 (15)-- Force CRC error on Xbar control link 3.