CISCO-ETHER-CFM-MIB :: cEtherCfmEventRmtPortState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ETHER-CFM-MIBcEtherCfmEventRmtPortState

cEtherCfmEventRmtPortState

Module: CISCO-ETHER-CFM-MIB

OID (symbolic): CISCO-ETHER-CFM-MIB::cEtherCfmEventRmtPortState

OID (numeric): 1.3.6.1.4.1.9.9.461.1.1.2.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The operational state of the port on which the remote MEP is configured. This information is derived from the port-state as indicated in the CC message. The possible values are:

'up' - The port is operationally up.

'down' - The port is operationally (but not administratively) down.

'adminDown' - The port is administratively down.

'test' - The port is in test mode (perhaps due to an IEEE Standard 802.3ah OAM intrusive loopback operation).

'remoteExcessiveErrors' - 802.3ah OAM reports that the other end of the link is receiving an excessive number of invalid frames.

'localExcessiveErrors' - 802.3ah OAM reports that this end of the link is receiving an excessive number of invalid frames.

'localNoData' - No data and no CFM messages have been received for an excessive length of time.

What is cEtherCfmEventRmtPortState?

Indicates the operational up/down state of the port on the remote MEP, as derived from the port-state field carried in its Continuity Check (CC) messages.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.461.1.1.2.1.14
snmpwalk -v2c -c public <target> CISCO-ETHER-CFM-MIB::cEtherCfmEventRmtPortState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.461.1.1.2.1.14.1
snmpget -v2c -c public <target> CISCO-ETHER-CFM-MIB::cEtherCfmEventRmtPortState.1

Start monitoring Cisco switching/routing equipment (Ethernet CFM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ETHER-CFM-MIB::cEtherCfmEventRmtPortState OID value, configure state conditions and alerts, and monitor any Cisco switching/routing equipment (Ethernet CFM) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.461ciscoEtherCfmMIBCISCO-ETHER-CFM-MIB
1.3.6.1.4.1.9.9.461.1ciscoEtherCfmMIBObjectsCISCO-ETHER-CFM-MIB
1.3.6.1.4.1.9.9.461.1.1cecCfmEventsCISCO-ETHER-CFM-MIB
1.3.6.1.4.1.9.9.461.1.1.2cEtherCfmEventTableCISCO-ETHER-CFM-MIB
1.3.6.1.4.1.9.9.461.1.1.2.1cEtherCfmEventEntryCISCO-ETHER-CFM-MIB
1.3.6.1.4.1.9.9.461.1.1.2.1.14cEtherCfmEventRmtPortStateCISCO-ETHER-CFM-MIB