All MIBs › CISCO-ENVMON-MIB › ciscoEnvMonAlarmContacts
ciscoEnvMonAlarmContacts
Module: CISCO-ENVMON-MIB
OID (symbolic): CISCO-ENVMON-MIB::ciscoEnvMonAlarmContacts
OID (numeric): 1.3.6.1.4.1.9.9.13.1.6
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Each bit is set to reflect the respective alarm being set. The bit will be cleared when the respective alarm is cleared.
What is ciscoEnvMonAlarmContacts?
Reports a bitmask where each bit reflects whether a corresponding hardware alarm contact is currently active, clearing automatically when the alarm condition clears.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.13.1.6 snmpwalk -v2c -c public <target> CISCO-ENVMON-MIB::ciscoEnvMonAlarmContacts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.13.1.6.1 snmpget -v2c -c public <target> CISCO-ENVMON-MIB::ciscoEnvMonAlarmContacts.1
Start monitoring Cisco routers and switches with environmental monitoring hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENVMON-MIB::ciscoEnvMonAlarmContacts OID value, configure state conditions and alerts, and monitor any Cisco routers and switches with environmental monitoring hardware from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.13 | ciscoEnvMonMIB | CISCO-ENVMON-MIB |
| 1.3.6.1.4.1.9.9.13.1 | ciscoEnvMonObjects | CISCO-ENVMON-MIB |
| 1.3.6.1.4.1.9.9.13.1.6 | ciscoEnvMonAlarmContacts | CISCO-ENVMON-MIB |