All MIBs › CISCO-ENTITY-SENSOR-EXT-MIB › ceSensorExtThresholdRelation
ceSensorExtThresholdRelation
Module: CISCO-ENTITY-SENSOR-EXT-MIB
OID (symbolic): CISCO-ENTITY-SENSOR-EXT-MIB::ceSensorExtThresholdRelation
OID (numeric): 1.3.6.1.4.1.9.9.745.1.1.1.3
Node type: OBJECT-TYPE
Type: CiscoSensorThresholdRelation
Access: read-write
Description: This object specifies the boolean relation between
sensor value (entPhySensorValue) and threshold value
(ceSensorExtThresholdValue), required to
trigger the alarm.
in pseudo-code, the evaluation-alarm mechanism is:
...
if (evaluate(entPhySensorValue,
ceSensorExtThresholdRelation,
ceSensorExtThresholdValue))
then
if (((ceSensorExtThresholdNotifEnable
== enabled) ||
(ceSensorExtThresholdNotifEnable
== transparent)) &&
(ceSensorExtThresholdNotifGlobalEnable
== enabled))
then
raise_alarm(sensor's entPhysicalIndex);
endif
endif
...What is ceSensorExtThresholdRelation?
Defines the comparison operator (e.g., greater than, less than, equal) used to evaluate the sensor's current reading against its configured threshold value to decide whether to trigger an alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.745.1.1.1.3 snmpwalk -v2c -c public <target> CISCO-ENTITY-SENSOR-EXT-MIB::ceSensorExtThresholdRelation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.745.1.1.1.3.1 snmpget -v2c -c public <target> CISCO-ENTITY-SENSOR-EXT-MIB::ceSensorExtThresholdRelation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.745.1.1.1.3.1 s <value>
Start monitoring Cisco network equipment (sensor threshold notifications) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENTITY-SENSOR-EXT-MIB::ceSensorExtThresholdRelation OID value, configure state conditions and alerts, and monitor any Cisco network equipment (sensor threshold notifications) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.745 | ciscoEntitySensorExtMIB | CISCO-ENTITY-SENSOR-EXT-MIB |
| 1.3.6.1.4.1.9.9.745.1 | ciscoEntitySensorExtMIBObjects | CISCO-ENTITY-SENSOR-EXT-MIB |
| 1.3.6.1.4.1.9.9.745.1.1 | ceSensorExtThresholdTable | CISCO-ENTITY-SENSOR-EXT-MIB |
| 1.3.6.1.4.1.9.9.745.1.1.1 | ceSensorExtThresholdEntry | CISCO-ENTITY-SENSOR-EXT-MIB |
| 1.3.6.1.4.1.9.9.745.1.1.1.3 | ceSensorExtThresholdRelation | CISCO-ENTITY-SENSOR-EXT-MIB |