All MIBs › CISCO-ENTITY-DIAG-MIB › ceDiagHMTestThresholdDefault
ceDiagHMTestThresholdDefault
Module: CISCO-ENTITY-DIAG-MIB
OID (symbolic): CISCO-ENTITY-DIAG-MIB::ceDiagHMTestThresholdDefault
OID (numeric): 1.3.6.1.4.1.9.9.350.1.7.2.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object indicates the default consecutive failure count threshold. When the specified failure count threshold is reached, the diagnostic test result is set to failure. A value of '0' indicates that the health monitor will not invoke this test.
What is ceDiagHMTestThresholdDefault?
Reports the default number of consecutive test failures required before the test result is marked as failed, with 0 meaning the health monitor does not run the test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.350.1.7.2.1.5 snmpwalk -v2c -c public <target> CISCO-ENTITY-DIAG-MIB::ceDiagHMTestThresholdDefault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.350.1.7.2.1.5.1 snmpget -v2c -c public <target> CISCO-ENTITY-DIAG-MIB::ceDiagHMTestThresholdDefault.1
Start monitoring Cisco modular chassis switches/routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENTITY-DIAG-MIB::ceDiagHMTestThresholdDefault OID value, configure state conditions and alerts, and monitor any Cisco modular chassis switches/routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.350 | ciscoEntityDiagMIB | CISCO-ENTITY-DIAG-MIB |
| 1.3.6.1.4.1.9.9.350.1 | ciscoEntityDiagMIBObjects | CISCO-ENTITY-DIAG-MIB |
| 1.3.6.1.4.1.9.9.350.1.7 | ceDiagHealthMonitor | CISCO-ENTITY-DIAG-MIB |
| 1.3.6.1.4.1.9.9.350.1.7.2 | ceDiagHMTestTable | CISCO-ENTITY-DIAG-MIB |
| 1.3.6.1.4.1.9.9.350.1.7.2.1 | ceDiagHMTestEntry | CISCO-ENTITY-DIAG-MIB |
| 1.3.6.1.4.1.9.9.350.1.7.2.1.5 | ceDiagHMTestThresholdDefault | CISCO-ENTITY-DIAG-MIB |