All MIBs › CISCO-ENTITY-DIAG-MIB › ceDiagHMSyslogEnabled

ceDiagHMSyslogEnabled

OID (symbolic): CISCO-ENTITY-DIAG-MIB::ceDiagHMSyslogEnabled

OID (numeric): 1.3.6.1.4.1.9.9.350.1.7.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether the system will generate syslog messages due to the tests run by health monitor.

What is ceDiagHMSyslogEnabled?

Enables or disables generation of syslog messages by the health monitor when it runs its diagnostic tests.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.350.1.7.1
snmpwalk -v2c -c public <target> CISCO-ENTITY-DIAG-MIB::ceDiagHMSyslogEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.350.1.7.1.1
snmpget -v2c -c public <target> CISCO-ENTITY-DIAG-MIB::ceDiagHMSyslogEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.350.1.7.1.1 s <value>

Start monitoring Cisco modular chassis switches/routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENTITY-DIAG-MIB::ceDiagHMSyslogEnabled OID value, configure state conditions and alerts, and monitor any Cisco modular chassis switches/routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.9.9.350	ciscoEntityDiagMIB	CISCO-ENTITY-DIAG-MIB
1.3.6.1.4.1.9.9.350.1	ciscoEntityDiagMIBObjects	CISCO-ENTITY-DIAG-MIB
1.3.6.1.4.1.9.9.350.1.7	ceDiagHealthMonitor	CISCO-ENTITY-DIAG-MIB
1.3.6.1.4.1.9.9.350.1.7.1	ceDiagHMSyslogEnabled	CISCO-ENTITY-DIAG-MIB

CISCO-ENTITY-DIAG-MIB :: ceDiagHMSyslogEnabled

ceDiagHMSyslogEnabled

Module

This MIB depends on