All MIBs › CISCO-DS3-MIB › cds3PlcpRcvRAICount
cds3PlcpRcvRAICount
Module: CISCO-DS3-MIB
OID (symbolic): CISCO-DS3-MIB::cds3PlcpRcvRAICount
OID (numeric): 1.3.6.1.4.1.9.9.132.1.3.2.1.3
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of times Remote Alarm Indication(RAI) was detected with or without integrating to RAI alarm.
What is cds3PlcpRcvRAICount?
Reports the number of times a Remote Alarm Indication was detected on the DS3 PLCP line, signaling that the far end reported a problem, whether or not it escalated into a full RAI alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.3.2.1.3 snmpwalk -v2c -c public <target> CISCO-DS3-MIB::cds3PlcpRcvRAICount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.3.2.1.3.1 snmpget -v2c -c public <target> CISCO-DS3-MIB::cds3PlcpRcvRAICount.1
Start monitoring Cisco routers (DS3 interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DS3-MIB::cds3PlcpRcvRAICount OID value, configure state conditions and alerts, and monitor any Cisco routers (DS3 interfaces) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1 | ciscoDs3MIBObjects | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.3 | cds3Stats | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.3.2 | cds3PlcpStatsTable | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.3.2.1 | cds3PlcpStatsEntry | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.3 | cds3PlcpRcvRAICount | CISCO-DS3-MIB |