CISCO-DS3-MIB :: cds3PlcpLineStatisticalAlarmState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DS3-MIBcds3PlcpLineStatisticalAlarmState

cds3PlcpLineStatisticalAlarmState

Module: CISCO-DS3-MIB

OID (symbolic): CISCO-DS3-MIB::cds3PlcpLineStatisticalAlarmState

OID (numeric): 1.3.6.1.4.1.9.9.132.1.2.2.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This variable is a bitmap of the DS3 Plcp Line Statictical
Alarms. It is represented as a sum, where value 2^(N-1) is added
to the sum if threshold corresponding to bit N is exceeded.
A value of zero for this object indicates no alarms.

Itemized below are the individual alarm bits:
BitPosition    Alarm
-----------    -----
1              Bip8CV 15 minute threshold exceeded
2              Bip8CV 24 hour threshold exceeded
3              Bip8ES 15 minute threshold exceeded
4              Bip8ES 24 hour threshold exceeded
5              Bip8SES 15 minute threshold exceeded
6              Bip8SES 24 hour threshold exceeded
7              Plcp SEFS 15 minute threshold exceeded
8              Plcp SEFS 24 hour threshold exceeded
9              Plcp UAS 15 minute threshold exceeded
10             Plcp UAS 24 hour threshold exceeded

What is cds3PlcpLineStatisticalAlarmState?

A read-only bitmap indicating which PLCP line statistical alarm thresholds have been exceeded, with each bit corresponding to a specific threshold condition and zero meaning no alarms.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.2.2.1.2
snmpwalk -v2c -c public <target> CISCO-DS3-MIB::cds3PlcpLineStatisticalAlarmState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.2.2.1.2.1
snmpget -v2c -c public <target> CISCO-DS3-MIB::cds3PlcpLineStatisticalAlarmState.1

Start monitoring Cisco routers (DS3 interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DS3-MIB::cds3PlcpLineStatisticalAlarmState OID value, configure state conditions and alerts, and monitor any Cisco routers (DS3 interfaces) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.132ciscoDs3MIBCISCO-DS3-MIB
1.3.6.1.4.1.9.9.132.1ciscoDs3MIBObjectsCISCO-DS3-MIB
1.3.6.1.4.1.9.9.132.1.2cds3AlarmCISCO-DS3-MIB
1.3.6.1.4.1.9.9.132.1.2.2cds3AlarmPlcpTableCISCO-DS3-MIB
1.3.6.1.4.1.9.9.132.1.2.2.1cds3AlarmPlcpEntryCISCO-DS3-MIB
1.3.6.1.4.1.9.9.132.1.2.2.1.2cds3PlcpLineStatisticalAlarmStateCISCO-DS3-MIB