All MIBs › CISCO-DS3-MIB › cds3LineType
cds3LineType
Module: CISCO-DS3-MIB
OID (symbolic): CISCO-DS3-MIB::cds3LineType
OID (numeric): 1.3.6.1.4.1.9.9.132.1.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps.
The values, in sequence, describe:
Following values are applicable to DS3 interfaces only.
ds3cbitadm : Indicates C-BIT ADM mode ds3cbitplcp : Indicates C-BIT PLCP mode ds3m23adm : Indicates M23 ADM mode ds3m23plcp : Indicates M23 PLCP mode dsx3M23 : Refer ANSI T1.107-1988 [9] dsx3SYNTRAN : Refer ANSI T1.107-1988 [9] dsx3CbitParity : Refer ANSI T1.107-1988 [9] dsx3ClearChannel : Refer ANSI T1.107-1988 [9] ds3cbitfrmronly : Indicates C-BIT FRAMER-ONLY mode ds3m23frmronly : Indicates M23 FRAMER-ONLY mode
Following values are applicable to E3 interfaces only.
e3g832adm : Indicates G.832 ADM mode e3g751adm : Indicates G.751 ADM mode e3g751plcp : Indicates G.751 PLCP mode e3Framed : Refer CCITT G.751 [12] e3Plcp : Refer ETSI T/NA(91)19 [14] e3g832frmronly : Indicates G.832 FRAMER-ONLY mode e3g751frmronly : Indicates G.751 FRAMER-ONLY mode.
What is cds3LineType?
Read-write setting that selects the DS3 C-bit or E3 application/line format for the interface (DS3 at 44.736 Mbps or E3 at 34.368 Mbps), which determines how usage and error statistics are interpreted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.1.1.1.1 snmpwalk -v2c -c public <target> CISCO-DS3-MIB::cds3LineType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.1.1.1.1.1 snmpget -v2c -c public <target> CISCO-DS3-MIB::cds3LineType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.132.1.1.1.1.1.1 i <value>
Start monitoring Cisco routers (DS3 interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DS3-MIB::cds3LineType OID value, configure state conditions and alerts, and monitor any Cisco routers (DS3 interfaces) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1 | ciscoDs3MIBObjects | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.1 | cds3Config | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.1.1 | cds3ConfigTable | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.1.1.1 | cds3ConfigEntry | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.1 | cds3LineType | CISCO-DS3-MIB |