All MIBs › CISCO-DS3-MIB › cds3LineStatisticalAlarmState
cds3LineStatisticalAlarmState
Module: CISCO-DS3-MIB
OID (symbolic): CISCO-DS3-MIB::cds3LineStatisticalAlarmState
OID (numeric): 1.3.6.1.4.1.9.9.132.1.2.1.1.1.30
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This is a bitmap of the DS3 Line Statistical alarms. It is represented as a sum where value 2^(N-1) is added to the sum if threshold corresponding to bit N is exceeded. Zero indicates no alarms. Itemized below are the individual alarm bits: BitPosition Alarm ----------- ----- 1 PES current 15 minute threshold exceeded 2 PES 24 hour threshold exceeded 3 PSES current 15 minute threshold exceeded 4 PSES 24 hour threshold exceeded 5 SEFS current 15 minute threshold exceeded 6 SEFS 24 hour threshold exceeded 7 UAS current 15 minute threshold exceeded 8 UAS 24 hour threshold exceeded 9 LCV current 15 minute threshold exceeded 10 LCV 24 hour threshold exceeded 11 PCV current 15 minute threshold exceeded 12 PCV 24 hour threshold exceeded 13 LES current 15 minute threshold exceeded 14 LES 24 hour threshold exceeded 15 CCV current 15 minute threshold exceeded 16 CCV 24 hour threshold exceeded 17 CES current 15 minute threshold exceeded 18 CES 24 hour threshold exceeded 19 CSES current 15 minute threshold exceeded 20 CSES 24 hour threshold exceeded 21 LSES current 15 minute threshold exceeded 22 LSES 24 hour threshold exceeded
What is cds3LineStatisticalAlarmState?
Reports a bitmap summarizing which DS3 line statistical alarms are currently active, with each bit position corresponding to a specific threshold being exceeded (zero means no alarms are active).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.2.1.1.1.30 snmpwalk -v2c -c public <target> CISCO-DS3-MIB::cds3LineStatisticalAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.132.1.2.1.1.1.30.1 snmpget -v2c -c public <target> CISCO-DS3-MIB::cds3LineStatisticalAlarmState.1
Start monitoring Cisco routers (DS3 interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DS3-MIB::cds3LineStatisticalAlarmState OID value, configure state conditions and alerts, and monitor any Cisco routers (DS3 interfaces) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1 | ciscoDs3MIBObjects | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.2 | cds3Alarm | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.2.1 | cds3AlarmConfig | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.2.1.1 | cds3AlarmConfigTable | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1 | cds3AlarmConfigEntry | CISCO-DS3-MIB |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.30 | cds3LineStatisticalAlarmState | CISCO-DS3-MIB |