CISCO-DOT3-OAM-MIB :: cdot3OamErrFrameThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DOT3-OAM-MIBcdot3OamErrFrameThreshold

cdot3OamErrFrameThreshold

Module: CISCO-DOT3-OAM-MIB

OID (symbolic): CISCO-DOT3-OAM-MIB::cdot3OamErrFrameThreshold

OID (numeric): 1.3.6.1.4.1.9.10.136.1.5.1.10

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm.

If cdot3OamErrFrameThreshold frame errors occur within a window of cdot3OamErrFrameWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window.

What is cdot3OamErrFrameThreshold?

Configures how many frame errors must occur within the Errored Frame window to trigger an event notification, with zero causing periodic notifications instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.136.1.5.1.10
snmpwalk -v2c -c public <target> CISCO-DOT3-OAM-MIB::cdot3OamErrFrameThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.136.1.5.1.10.1
snmpget -v2c -c public <target> CISCO-DOT3-OAM-MIB::cdot3OamErrFrameThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.136.1.5.1.10.1 i <value>

Start monitoring Cisco switches and routers (802.3ah Ethernet OAM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT3-OAM-MIB::cdot3OamErrFrameThreshold OID value, configure state conditions and alerts, and monitor any Cisco switches and routers (802.3ah Ethernet OAM) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.136cdot3OamMIBCISCO-DOT3-OAM-MIB
1.3.6.1.4.1.9.10.136.1cdot3OamObjectsCISCO-DOT3-OAM-MIB
1.3.6.1.4.1.9.10.136.1.5cdot3OamEventConfigTableCISCO-DOT3-OAM-MIB
1.3.6.1.4.1.9.10.136.1.5.1cdot3OamEventConfigEntryCISCO-DOT3-OAM-MIB
1.3.6.1.4.1.9.10.136.1.5.1.10cdot3OamErrFrameThresholdCISCO-DOT3-OAM-MIB