All MIBs › CISCO-DOT11-WIDS-MIB › cDot11WidsFloodDetectEnable
cDot11WidsFloodDetectEnable
Module: CISCO-DOT11-WIDS-MIB
OID (symbolic): CISCO-DOT11-WIDS-MIB::cDot11WidsFloodDetectEnable
OID (numeric): 1.3.6.1.4.1.9.9.456.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object is used to enable or disable the WIDS flood detection feature.
Set this MIB object to 'true' to enable the flood detection and 'false' to disable it.
Note that the values configured through cDot11WidsFloodThreshold and cDot11WidsEapolFloodInterval take effect only if flood detection is enabled through this MIB object.
What is cDot11WidsFloodDetectEnable?
Read-write flag that enables or disables the Wireless Intrusion Detection System's flood detection feature, which watches for excessive authentication attempts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.456.1.1.1 snmpwalk -v2c -c public <target> CISCO-DOT11-WIDS-MIB::cDot11WidsFloodDetectEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.456.1.1.1.1 snmpget -v2c -c public <target> CISCO-DOT11-WIDS-MIB::cDot11WidsFloodDetectEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.456.1.1.1.1 s <value>
Start monitoring Cisco wireless access points and WLAN controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-WIDS-MIB::cDot11WidsFloodDetectEnable OID value, configure state conditions and alerts, and monitor any Cisco wireless access points and WLAN controllers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | CISCO-DOT11-WIDS-MIB |
| 1.3.6.1.4.1.9.9.456.1 | ciscoDot11WidsMIBObjects | CISCO-DOT11-WIDS-MIB |
| 1.3.6.1.4.1.9.9.456.1.1 | ciscoDot11WidsAuthFailures | CISCO-DOT11-WIDS-MIB |
| 1.3.6.1.4.1.9.9.456.1.1.1 | cDot11WidsFloodDetectEnable | CISCO-DOT11-WIDS-MIB |