All MIBs › CISCO-DOT11-RADIO-DIAGNOSTIC-MIB › cDot11RadioDiagTempTxPowerLevel
cDot11RadioDiagTempTxPowerLevel
Module: CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
OID (symbolic): CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempTxPowerLevel
OID (numeric): 1.3.6.1.4.1.9.10.105.1.1.1.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Temporary transmit power level for the 802.11 interface identified by ifIndex.
A value in the range of 1 to 8 refers to one of the power levels from the MIB table 'dot11PhyTxPowerTable' in IEEE802dot11-MIB. The power levels that can be assigned to this object from the set of acceptable values mentioned above vary depending on the value of the MIB object cd11IfCurrentCarrierSet defined in CISCO-DOT11-IF-MIB.
The object cDot11RadioDiagSettingsEnabled must be set to 'true' to apply the temporary value specified through this object to the 802.11 interface. Setting cDot11RadioDiagSettingsEnabled to 'false' restores the power setting of this interface to the original value that was there before applying the temporary value to that interface. A value of 0 indicates that this object hasn't been configured with a valid power level.
What is cDot11RadioDiagTempTxPowerLevel?
A read-write value used to configure a temporary transmit power level (selected from predefined power level indexes) for diagnostic testing on an 802.11 radio interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempTxPowerLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempTxPowerLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.2.1 i <value>
Start monitoring Cisco 802.11a/b/g access points and wireless bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempTxPowerLevel OID value, configure state conditions and alerts, and monitor any Cisco 802.11a/b/g access points and wireless bridges from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.105 | ciscoDot11RadioDiagMIB | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1 | cDot11RadioDiagMIBObjects | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1 | cDot11RadioDiagConfigGlobal | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1 | cDot11RadioDiagTable | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1 | cDot11RadioDiagEntry | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1.2 | cDot11RadioDiagTempTxPowerLevel | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |