All MIBs › CISCO-DOT11-RADIO-DIAGNOSTIC-MIB › cDot11RadioDiagTempClientTxPower
cDot11RadioDiagTempClientTxPower
Module: CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
OID (symbolic): CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempClientTxPower
OID (numeric): 1.3.6.1.4.1.9.10.105.1.1.1.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Temporary transmit power level for the 802.11 clients associated with this station through the 802.11 interface identified by ifIndex.
The value configured through this object is carried by the beacon frames transmitted by this 802.11 station and picked up by the associated clients, if any, from these beacon frames to set their respective transmit power levels.
A value in the range of 1 to 8 refers to one of the recommended power levels from the table cd11IfClientTxPowerTable defined in CISCO-DOT11-IF-MIB. The power levels that can be assigned to this object from the set of acceptable values mentioned above vary depending on the value of the MIB object cd11IfCurrentCarrierSet defined in CISCO-DOT11-IF-MIB.
The object cDot11RadioDiagSettingsEnabled must be set to 'true' to apply the temporary value specified through this object to the respective clients. Setting cDot11RadioDiagSettingsEnabled to 'false' restores the transmit power setting of the associated clients to the original value that was there before applying this temporary value to those clients. A value of 0 indicates that this object hasn't been configured with a valid power level.
What is cDot11RadioDiagTempClientTxPower?
A read-write value setting a temporary transmit power level to be advertised (via beacon frames) to wireless clients associated with this 802.11 interface for diagnostic purposes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempClientTxPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempClientTxPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.5.1 i <value>
Start monitoring Cisco 802.11a/b/g access points and wireless bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempClientTxPower OID value, configure state conditions and alerts, and monitor any Cisco 802.11a/b/g access points and wireless bridges from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.105 | ciscoDot11RadioDiagMIB | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1 | cDot11RadioDiagMIBObjects | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1 | cDot11RadioDiagConfigGlobal | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1 | cDot11RadioDiagTable | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1 | cDot11RadioDiagEntry | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1.5 | cDot11RadioDiagTempClientTxPower | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |