All MIBs › CISCO-DOT11-RADIO-DIAGNOSTIC-MIB › cDot11RadioDiagTempChannel
cDot11RadioDiagTempChannel
Module: CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
OID (symbolic): CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempChannel
OID (numeric): 1.3.6.1.4.1.9.10.105.1.1.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Temporary channel number for the 802.11 interface identified by ifIndex.
The value this object takes depends on the value of the object dot11PHYType defined in IEEE802dot11-MIB.
The semantics are as follows.
If dot11PHYType equals 'ofdm', the acceptable values for this object are 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157 and 161.
If dot11PHYType equals 'dsss' or 'erp', the acceptable values for this object are from 1 to 14.
The channel numbers that can be assigned to this object from the set of acceptable values mentioned above vary depending on the value of the MIB object cd11IfCurrentCarrierSet defined in CISCO-DOT11-IF MIB.
The object cDot11RadioDiagSettingsEnabled must be set to 'true' to apply the temporary value specified through this object to the 802.11 interface. Setting cDot11RadioDiagSettingsEnabled to 'false' temporary value to that interface restores the channel setting of this interface to the original value that was there before applying the temporary value to that interface. A value of 0 indicates that this object hasn't been configured with a valid channel number.
What is cDot11RadioDiagTempChannel?
A read-write value used to set a temporary diagnostic channel number for a specific 802.11 radio interface, with valid values depending on the interface's PHY type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.1 snmpwalk -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempChannel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.1.1 snmpget -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempChannel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.1.1 i <value>
Start monitoring Cisco 802.11a/b/g access points and wireless bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempChannel OID value, configure state conditions and alerts, and monitor any Cisco 802.11a/b/g access points and wireless bridges from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.105 | ciscoDot11RadioDiagMIB | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1 | cDot11RadioDiagMIBObjects | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1 | cDot11RadioDiagConfigGlobal | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1 | cDot11RadioDiagTable | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1 | cDot11RadioDiagEntry | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1.1 | cDot11RadioDiagTempChannel | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |