All MIBs › CISCO-DOT11-RADIO-DIAGNOSTIC-MIB › cDot11RadioDiagSettingsEnabled
cDot11RadioDiagSettingsEnabled
Module: CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
OID (symbolic): CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagSettingsEnabled
OID (numeric): 1.3.6.1.4.1.9.10.105.1.1.1.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: A flag to indicate whether the station will apply the temporary channel, transmit power settings and the data rate sets configured in this entry to the particular dot11 interface and the client transmit power setting to the clients associated with this station through that dot11 interface.
A value of 'true' indicates that the station will apply the temporary channel, transmit power settings and the data rate sets configured in this entry to the dot11 interface and the client transmit power to the respective associated clients.
A value of 'false' indicates that station will use it's original channel, transmit power and data rate sets for data communication over the respective dot11 interface. Also, the station will revert back the transmit power of the clients associated through the particular dot11 interface to their original transmit power levels.
What is cDot11RadioDiagSettingsEnabled?
A read-write flag that determines whether the temporary channel, transmit power, and data rate diagnostic settings should be applied to the 802.11 interface and its associated clients.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.4 snmpwalk -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagSettingsEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.4.1 snmpget -v2c -c public <target> CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagSettingsEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.105.1.1.1.1.4.1 s <value>
Start monitoring Cisco 802.11a/b/g access points and wireless bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagSettingsEnabled OID value, configure state conditions and alerts, and monitor any Cisco 802.11a/b/g access points and wireless bridges from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.105 | ciscoDot11RadioDiagMIB | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1 | cDot11RadioDiagMIBObjects | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1 | cDot11RadioDiagConfigGlobal | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1 | cDot11RadioDiagTable | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1 | cDot11RadioDiagEntry | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.9.10.105.1.1.1.1.4 | cDot11RadioDiagSettingsEnabled | CISCO-DOT11-RADIO-DIAGNOSTIC-MIB |