CISCO-DOT11-IF-MIB :: cd11IfRatesSensRequiredSnr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DOT11-IF-MIBcd11IfRatesSensRequiredSnr

cd11IfRatesSensRequiredSnr

Module: CISCO-DOT11-IF-MIB

OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfRatesSensRequiredSnr

OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.2.18.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The minimum SNR requirement for each data rate supported by a radio interface, when using the modulation technique specified by cd11IfRadioModulationClass. This is the required carrier to noise difference.

What is cd11IfRatesSensRequiredSnr?

This object specifies the minimum Signal-to-Noise Ratio (SNR) requirement for each data rate supported by a wireless interface using a particular modulation technique. It represents the carrier-to-noise difference threshold needed for reliable communication at that rate. An operator would use this to understand link quality requirements and to diagnose why wireless rates may not be negotiating to expected levels.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.18.1.1
snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfRatesSensRequiredSnr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.18.1.1.1
snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfRatesSensRequiredSnr.1

Start monitoring Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-IF-MIB::cd11IfRatesSensRequiredSnr OID value, configure state conditions and alerts, and monitor any Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.272ciscoDot11IfMIBCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1ciscoDot11IfMIBObjectsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1cd11IfConfigurationsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2cd11IfPhyConfigCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.18cd11IfDataRatesSensitivityTableCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.18.1cd11IfDataRatesSensitivityEntryCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.18.1.1cd11IfRatesSensRequiredSnrCISCO-DOT11-IF-MIB