CISCO-DOT11-IF-MIB :: cd11IfPhyMacSpecification

MIB Reference — IPNetwork Monitor

All MIBsCISCO-DOT11-IF-MIBcd11IfPhyMacSpecification

cd11IfPhyMacSpecification

Module: CISCO-DOT11-IF-MIB

OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfPhyMacSpecification

OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.2.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description:

This object specifies which IEEE 802.11 Standard applies to this radio interface. ieee802dot11a(1) - IEEE 802.11a Standard, ieee802dot11b(2) - IEEE 802.11b Standard, ieee802dot11g(3) - IEEE 802.11g Standard.

What is cd11IfPhyMacSpecification?

This OID identifies which IEEE 802.11 wireless standard (802.11a, b, or g) a radio interface supports. The standard determines the frequency band, speed, and communication protocol used. An operator would check this to confirm that a wireless card is compatible with their network's standard and can operate at expected speeds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.1.1.6
snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfPhyMacSpecification

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.1.1.6.1
snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfPhyMacSpecification.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.272ciscoDot11IfMIBCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1ciscoDot11IfMIBObjectsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1cd11IfConfigurationsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2cd11IfPhyConfigCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.1cd11IfPhyOperationTableCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.1.1cd11IfPhyOperationEntryCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.1.1.6cd11IfPhyMacSpecificationCISCO-DOT11-IF-MIB