All MIBs › CISCO-DOT11-IF-MIB › cd11IfMultipleBssidEnable
cd11IfMultipleBssidEnable
Module: CISCO-DOT11-IF-MIB
OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfMultipleBssidEnable
OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.1.1.1.16
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: If it is 'true', multiple broadcast SSID is enabled on the radio. To a wireless client, a MBSSID AP appears to be several distinct co-located APs, and it transmits a beacon for each broadcast SSID or SSID. This allows all of the SSIDs visible for passive scanning.
What is cd11IfMultipleBssidEnable?
This setting controls whether a single wireless access point can broadcast multiple network names (SSIDs) simultaneously, making it appear as several distinct APs to clients. When enabled, all configured SSIDs become visible to wireless devices performing network scans, allowing clients to see and connect to their preferred network name. An operator would enable this feature to support multiple service offerings or departments from a single physical AP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.1.1.1.16 snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfMultipleBssidEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.1.1.1.16.1 snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfMultipleBssidEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.272.1.1.1.1.1.16.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cd11IfMultipleBssidEnable.1
Start monitoring Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-IF-MIB::cd11IfMultipleBssidEnable OID value, configure state conditions and alerts, and monitor any Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1 | ciscoDot11IfMIBObjects | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1 | cd11IfConfigurations | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.1 | cd11IfManagement | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.1.1 | cd11IfStationConfigTable | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.1.1.1 | cd11IfStationConfigEntry | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.1.1.1.16 | cd11IfMultipleBssidEnable | CISCO-DOT11-IF-MIB |