CISCO-DOT11-IF-MIB :: cd11IfErpOfdmTxPowerLevel3

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DOT11-IF-MIBcd11IfErpOfdmTxPowerLevel3

cd11IfErpOfdmTxPowerLevel3

Module: CISCO-DOT11-IF-MIB

OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfErpOfdmTxPowerLevel3

OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.2.14.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The ERP-OFDM transmit output power for LEVEL3.

What is cd11IfErpOfdmTxPowerLevel3?

This read-only integer reports the transmit output power for ERP-OFDM wireless interfaces at power level 3, measured in milliwatts with a range of 0 to 10,000 mW. Operators monitor this value to verify radio power settings comply with regulatory limits and optimize coverage. The value may change dynamically based on transmission rate and channel conditions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.14.1.4
snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfErpOfdmTxPowerLevel3

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.14.1.4.1
snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfErpOfdmTxPowerLevel3.1

Start monitoring Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-IF-MIB::cd11IfErpOfdmTxPowerLevel3 OID value, configure state conditions and alerts, and monitor any Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.272ciscoDot11IfMIBCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1ciscoDot11IfMIBObjectsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1cd11IfConfigurationsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2cd11IfPhyConfigCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.14cd11IfErpOfdmTxPowerTableCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.14.1cd11IfErpOfdmTxPowerEntryCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.14.1.4cd11IfErpOfdmTxPowerLevel3CISCO-DOT11-IF-MIB