CISCO-DOT11-IF-MIB :: cd11IfErpOfdmTxPowerLevel1

MIB Reference — IPNetwork Monitor

All MIBsCISCO-DOT11-IF-MIBcd11IfErpOfdmTxPowerLevel1

cd11IfErpOfdmTxPowerLevel1

Module: CISCO-DOT11-IF-MIB

OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfErpOfdmTxPowerLevel1

OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.2.14.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description:

The ERP-OFDM transmit output power for LEVEL1.

What is cd11IfErpOfdmTxPowerLevel1?

This object reports the transmit power output level for ERP-OFDM (Extended Rate Physical layer using Orthogonal Frequency Division Multiplexing) wireless mode at power level 1, measured in milliwatts. ERP-OFDM is used in modern 802.11g wireless access points to support higher data rates. A wireless network administrator would check this value to verify the access point is transmitting at expected power levels and to diagnose coverage or interference issues.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.14.1.2
snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfErpOfdmTxPowerLevel1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.14.1.2.1
snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfErpOfdmTxPowerLevel1.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.272ciscoDot11IfMIBCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1ciscoDot11IfMIBObjectsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1cd11IfConfigurationsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2cd11IfPhyConfigCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.14cd11IfErpOfdmTxPowerTableCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.14.1cd11IfErpOfdmTxPowerEntryCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.2.14.1.2cd11IfErpOfdmTxPowerLevel1CISCO-DOT11-IF-MIB