CISCO-DOT11-IF-MIB :: cd11IfDot11UpgradeStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DOT11-IF-MIBcd11IfDot11UpgradeStatus

cd11IfDot11UpgradeStatus

Module: CISCO-DOT11-IF-MIB

OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfDot11UpgradeStatus

OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.1.12.1.1

Node type: OBJECT-TYPE

Type: Cd11IfDot11UpgradeStatus

Access: read-only

Description: This object represents the status of upgrade of a dot11 radio interface.

What is cd11IfDot11UpgradeStatus?

This object reports the status of a firmware or frequency upgrade in progress on a Cisco 802.11 wireless radio interface. It tracks whether the radio is being upgraded to support new frequency bands (such as the 5150-5250 MHz range) or newer operating modes. A wireless administrator would monitor this during radio upgrades to ensure all interfaces successfully transition to the new configuration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.1.12.1.1
snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfDot11UpgradeStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.1.12.1.1.1
snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfDot11UpgradeStatus.1

Start monitoring Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-IF-MIB::cd11IfDot11UpgradeStatus OID value, configure state conditions and alerts, and monitor any Cisco Aironet/Catalyst wireless access points (802.11 radio interfaces) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.272ciscoDot11IfMIBCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1ciscoDot11IfMIBObjectsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1cd11IfConfigurationsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1cd11IfManagementCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1.12cd11IfDot11UpgradeStatusTableCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1.12.1cd11IfDot11UpgradeStatusEntryCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1.12.1.1cd11IfDot11UpgradeStatusCISCO-DOT11-IF-MIB