All MIBs › CISCO-DOT11-IF-MIB › cd11IfClientTxPowerLevel6
cd11IfClientTxPowerLevel6
Module: CISCO-DOT11-IF-MIB
OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfClientTxPowerLevel6
OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.2.13.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description:
The client transmit output power for LEVEL6 in mW or dBm.
What is cd11IfClientTxPowerLevel6?
This read-only object reports the transmit output power for wireless client access point LEVEL6, expressed in milliwatts or decibels. Wireless engineers use this to verify that access points are operating at the correct power level for desired coverage and interference control. This metric is essential for optimizing RF performance and ensuring regulatory compliance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.13.1.7 snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfClientTxPowerLevel6
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.2.13.1.7.1 snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfClientTxPowerLevel6.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1 | ciscoDot11IfMIBObjects | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1 | cd11IfConfigurations | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.2 | cd11IfPhyConfig | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.2.13 | cd11IfClientTxPowerTable | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.2.13.1 | cd11IfClientTxPowerEntry | CISCO-DOT11-IF-MIB |
| 1.3.6.1.4.1.9.9.272.1.1.2.13.1.7 | cd11IfClientTxPowerLevel6 | CISCO-DOT11-IF-MIB |