CISCO-DOT11-IF-MIB :: cd11IfAuxSsidAuthAlgEapMethod

MIB Reference — IPNetwork Monitor

All MIBs › CISCO-DOT11-IF-MIB › cd11IfAuxSsidAuthAlgEapMethod

cd11IfAuxSsidAuthAlgEapMethod

Module: CISCO-DOT11-IF-MIB

OID (symbolic): CISCO-DOT11-IF-MIB::cd11IfAuxSsidAuthAlgEapMethod

OID (numeric): 1.3.6.1.4.1.9.9.272.1.1.1.7.1.5

Node type: OBJECT-TYPE

Type: SnmpAdminString

Access: read-write

Description:

If the value of cd11IfAuxSsidAuthAlgRequireEap is 'true' or dot11AuthenticationAlgorithm is Network-EAP, this is the EAP method list to used for the EAP authentication.

What is cd11IfAuxSsidAuthAlgEapMethod?

This read-write object specifies which EAP method list to use for EAP authentication when EAP is required (or Network-EAP is the configured algorithm) for the auxiliary SSID.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.1.7.1.5
snmpwalk -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfAuxSsidAuthAlgEapMethod

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.272.1.1.1.7.1.5.1
snmpget -v2c -c public <target> CISCO-DOT11-IF-MIB::cd11IfAuxSsidAuthAlgEapMethod.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.272.1.1.1.7.1.5.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.272ciscoDot11IfMIBCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1ciscoDot11IfMIBObjectsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1cd11IfConfigurationsCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1cd11IfManagementCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1.7cd11IfAuxSsidAuthAlgTableCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1.7.1cd11IfAuxSsidAuthAlgEntryCISCO-DOT11-IF-MIB
1.3.6.1.4.1.9.9.272.1.1.1.7.1.5cd11IfAuxSsidAuthAlgEapMethodCISCO-DOT11-IF-MIB

Module

This MIB depends on