All MIBs › CISCO-DOT11-HT-PHY-MIB › cD11HtPhyCurrentExtensionChannel
cD11HtPhyCurrentExtensionChannel
Module: CISCO-DOT11-HT-PHY-MIB
OID (symbolic): CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCurrentExtensionChannel
OID (numeric): 1.3.6.1.4.1.9.9.607.1.1.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object represents the channel extension offset. The semantics are as follows.
noExtension - No extension channel is present and the radio operates in the 20MHz mode.
extensionAbove - The extension channel is above the control channel. This is applicable only if the radio operates in the 40MHz mode.
extensionBelow - The extension channel is below the control channel. This is applicable only if the radio operates in the 40MHz mode.
What is cD11HtPhyCurrentExtensionChannel?
Read-write setting reporting/controlling the channel extension offset relative to the control channel, such as no extension (20 MHz mode) or an extension channel positioned above the control channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.607.1.1.2.1.7 snmpwalk -v2c -c public <target> CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCurrentExtensionChannel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.607.1.1.2.1.7.1 snmpget -v2c -c public <target> CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCurrentExtensionChannel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.607.1.1.2.1.7.1 i <value>
Start monitoring Cisco 802.11n-capable wireless LAN access points with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCurrentExtensionChannel OID value, configure state conditions and alerts, and monitor any Cisco 802.11n-capable wireless LAN access points from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.607 | ciscoDot11HtPhyMIB | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1 | ciscoDot11HtPhyMIBObjects | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1 | cD11HtPhy | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1.2 | cD11HtPhyTable | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1.2.1 | cD11HtPhyEntry | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1.2.1.7 | cD11HtPhyCurrentExtensionChannel | CISCO-DOT11-HT-PHY-MIB |