All MIBs › CISCO-DOT11-HT-PHY-MIB › cD11HtPhyCalibrationImplemented
cD11HtPhyCalibrationImplemented
Module: CISCO-DOT11-HT-PHY-MIB
OID (symbolic): CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCalibrationImplemented
OID (numeric): 1.3.6.1.4.1.9.9.607.1.1.4.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the level of calibration supported by the implementation. The semantics are follows.
'inCapable' - This station can't participate in a calibration procedure initiated by another station.
'unableToInitiate' - This station can involve in calibration, but cannot apply reciprocity correction vector received from the initiator and cannot initiate calibration.
'ableToInitiate' - This station can initiate calibration but cannot apply reciprocity correction vector received from the initiator.
'fullyCapable' - This statin can participate in a calibration procedure initiated by another station, can respond to a Sounding PPDU and provide a MIMO channel measurement report in response to the receipt of a Sounding PPDU. The station can also apply reciprocity correction vector received from the initiator of calibration response.
What is cD11HtPhyCalibrationImplemented?
Read-only value reporting the level of transmit beamforming calibration supported by the station, such as whether it can participate in a calibration procedure initiated by another station.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.607.1.1.4.1.6 snmpwalk -v2c -c public <target> CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCalibrationImplemented
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.607.1.1.4.1.6.1 snmpget -v2c -c public <target> CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCalibrationImplemented.1
Start monitoring Cisco 802.11n-capable wireless LAN access points with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-HT-PHY-MIB::cD11HtPhyCalibrationImplemented OID value, configure state conditions and alerts, and monitor any Cisco 802.11n-capable wireless LAN access points from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.607 | ciscoDot11HtPhyMIB | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1 | ciscoDot11HtPhyMIBObjects | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1 | cD11HtPhy | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1.4 | cD11HtPhyTxBFConfigTable | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1.4.1 | cD11HtPhyTxBFConfigEntry | CISCO-DOT11-HT-PHY-MIB |
| 1.3.6.1.4.1.9.9.607.1.1.4.1.6 | cD11HtPhyCalibrationImplemented | CISCO-DOT11-HT-PHY-MIB |