CISCO-DOT11-HT-MAC-MIB :: cD11HtMacOperationalMCSSet

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-DOT11-HT-MAC-MIB › cD11HtMacOperationalMCSSet

cD11HtMacOperationalMCSSet

Module: CISCO-DOT11-HT-MAC-MIB

OID (symbolic): CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperationalMCSSet

OID (numeric): 1.3.6.1.4.1.9.9.626.1.1.1.1.1

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This object represents the set of MCS at which the station may transmit data. Each bit represents an MCS index and corresponds to a particular data rate. Each MCS shall be within the range from 0 to 127, and shall be supported for receiving data.

This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request and Reassociation Response frames and is used to indicate which MCS values shall be supported by all the devices in the BSS. When this object is zeroed, it indicates that the other stations in the BSS shall use legacy data rates.

What is cD11HtMacOperationalMCSSet?

A read-write bitmap indicating the set of 802.11n Modulation and Coding Scheme (MCS) indexes, each corresponding to a data rate, that the station is permitted to use for transmitting data.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.626.1.1.1.1.1
snmpwalk -v2c -c public <target> CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperationalMCSSet

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.626.1.1.1.1.1.1
snmpget -v2c -c public <target> CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperationalMCSSet.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.626.1.1.1.1.1.1 s <value>

Start monitoring Cisco 802.11n wireless access point/controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperationalMCSSet OID value, configure state conditions and alerts, and monitor any Cisco 802.11n wireless access point/controller from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.626ciscoDot11HtMacMIBCISCO-DOT11-HT-MAC-MIB
1.3.6.1.4.1.9.9.626.1ciscoDot11HtMacMIBObjectsCISCO-DOT11-HT-MAC-MIB
1.3.6.1.4.1.9.9.626.1.1cD11HtMacStationConfigCISCO-DOT11-HT-MAC-MIB
1.3.6.1.4.1.9.9.626.1.1.1cD11HtMacStationConfigTableCISCO-DOT11-HT-MAC-MIB
1.3.6.1.4.1.9.9.626.1.1.1.1cD11HtMacStationConfigEntryCISCO-DOT11-HT-MAC-MIB
1.3.6.1.4.1.9.9.626.1.1.1.1.1cD11HtMacOperationalMCSSetCISCO-DOT11-HT-MAC-MIB