All MIBs › CISCO-DOT11-HT-MAC-MIB › cD11HtMacOperatingMode
cD11HtMacOperatingMode
Module: CISCO-DOT11-HT-MAC-MIB
OID (symbolic): CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperatingMode
OID (numeric): 1.3.6.1.4.1.9.9.626.1.2.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object represents the level of protection to be provided to the data transmissions of 802.11n radios. The semantics are as follows.
'pureHt' - No protection will be provided to the high throughput tranmissions in the BSS started on this interface. This indicates that there will only be those high-throughput devices associated to the AP in the respective BSS.
'optionalProtection' - Protection is optional considering that there could be legacy devices in the control and extension channels.
'mandatoryFortyProtection' - Protection is mandatory for all the 40MHz channel transmissions.
'mandatoryAllProtection' - There are legacy devices in the BSS and hence all high throughput transmissions are mandatorily protected.
What is cD11HtMacOperatingMode?
This read-write object sets the level of protection applied to 802.11n high-throughput data transmissions in the BSS, such as pure HT mode with no protection versus protected modes for mixed environments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.626.1.2.1.1.1 snmpwalk -v2c -c public <target> CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperatingMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.626.1.2.1.1.1.1 snmpget -v2c -c public <target> CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperatingMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.626.1.2.1.1.1.1 i <value>
Start monitoring Cisco 802.11n wireless access point/controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-HT-MAC-MIB::cD11HtMacOperatingMode OID value, configure state conditions and alerts, and monitor any Cisco 802.11n wireless access point/controller from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.626 | ciscoDot11HtMacMIB | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1 | ciscoDot11HtMacMIBObjects | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.2 | cD11HtMacOperations | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.2.1 | cD11HtMacOperationTable | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.2.1.1 | cD11HtMacOperationEntry | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.2.1.1.1 | cD11HtMacOperatingMode | CISCO-DOT11-HT-MAC-MIB |