All MIBs › CISCO-DOT11-HT-MAC-MIB › cD11HtMacMIMOPowerSave
cD11HtMacMIMOPowerSave
Module: CISCO-DOT11-HT-MAC-MIB
OID (symbolic): CISCO-DOT11-HT-MAC-MIB::cD11HtMacMIMOPowerSave
OID (numeric): 1.3.6.1.4.1.9.9.626.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents the operational power save state of MIMO. The semantics are defined as follows.
'static' - The dot11 interface is operating in static MIMO Power Save mode and hence, other stations should not send MIMO packets destined to this dot11 interface.
'dynamic'- The interface switches out of the MIMO Power Save mode to enable multiple receive chains when an RTS is received and switches back to the single receive-chain mode once the unicast transmission of the MPDU is complete.
'mimo' - The dot11 interface always has multiple receive-chains enabled and hence MIMO packets can always be sent to this interface.
What is cD11HtMacMIMOPowerSave?
Reports the operational MIMO power save state of the 802.11 interface (e.g. static mode), indicating whether other stations should avoid sending MIMO packets to it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.626.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-DOT11-HT-MAC-MIB::cD11HtMacMIMOPowerSave
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.626.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-DOT11-HT-MAC-MIB::cD11HtMacMIMOPowerSave.1
Start monitoring Cisco 802.11n wireless access point/controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-HT-MAC-MIB::cD11HtMacMIMOPowerSave OID value, configure state conditions and alerts, and monitor any Cisco 802.11n wireless access point/controller from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.626 | ciscoDot11HtMacMIB | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1 | ciscoDot11HtMacMIBObjects | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.1 | cD11HtMacStationConfig | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.1.1 | cD11HtMacStationConfigTable | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.1.1.1 | cD11HtMacStationConfigEntry | CISCO-DOT11-HT-MAC-MIB |
| 1.3.6.1.4.1.9.9.626.1.1.1.1.2 | cD11HtMacMIMOPowerSave | CISCO-DOT11-HT-MAC-MIB |