All MIBs › CISCO-DOCS-REMOTE-QUERY-MIB › cdrqCmtsCmPollerInterval
cdrqCmtsCmPollerInterval
Module: CISCO-DOCS-REMOTE-QUERY-MIB
OID (symbolic): CISCO-DOCS-REMOTE-QUERY-MIB::cdrqCmtsCmPollerInterval
OID (numeric): 1.3.6.1.4.1.9.10.59.1.1.2
Node type: OBJECT-TYPE
Type: TimeInterval
Access: read-write
Description: An interval between two polling cycles of the CMTS CM Poller.
The poller will not start the next cycle until it finished polling for the last CM , even though the time has expired. If the cdrqCmtsCmPollerInterval is too small with a large number of CMs, the poller would tie up the CPU and resources and possibly degrade the system's performance.
Any change in the cdrqCmtsCmPollerInterval will not be reflected if the poller has already been enabled.
User cannot set cdrqCmtsCmPollerInterval to 0 but will read 0 when CMTS is first restarted and remote-query is not configured. Once poller is configured, cdrqCmtsCmPollerInterval will retain the value even if poller is later disabled
What is cdrqCmtsCmPollerInterval?
Configures the time interval between successive polling cycles of the CMTS's remote cable modem poller; a new cycle won't begin until the prior one completes even if this interval elapses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.59.1.1.2 snmpwalk -v2c -c public <target> CISCO-DOCS-REMOTE-QUERY-MIB::cdrqCmtsCmPollerInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.59.1.1.2.1 snmpget -v2c -c public <target> CISCO-DOCS-REMOTE-QUERY-MIB::cdrqCmtsCmPollerInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.59.1.1.2.1 s <value>
Start monitoring Cisco DOCSIS CMTS platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOCS-REMOTE-QUERY-MIB::cdrqCmtsCmPollerInterval OID value, configure state conditions and alerts, and monitor any Cisco DOCSIS CMTS platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.59 | ciscoDocsRemoteQueryMIB | CISCO-DOCS-REMOTE-QUERY-MIB |
| 1.3.6.1.4.1.9.10.59.1 | ciscoDocsRemQueryMIBObjects | CISCO-DOCS-REMOTE-QUERY-MIB |
| 1.3.6.1.4.1.9.10.59.1.1 | cdrqPoller | CISCO-DOCS-REMOTE-QUERY-MIB |
| 1.3.6.1.4.1.9.10.59.1.1.2 | cdrqCmtsCmPollerInterval | CISCO-DOCS-REMOTE-QUERY-MIB |