CISCO-DMN-DSG-PROTOCOLS-MIB :: protocolsCtrlMPE

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-DMN-DSG-PROTOCOLS-MIB › protocolsCtrlMPE

protocolsCtrlMPE

Module: CISCO-DMN-DSG-PROTOCOLS-MIB

OID (symbolic): CISCO-DMN-DSG-PROTOCOLS-MIB::protocolsCtrlMPE

OID (numeric): 1.3.6.1.4.1.1429.2.2.5.39.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Select whether to allow MPE protocol or not and select a mode.

What is protocolsCtrlMPE?

This read-write setting controls whether the Multiprotocol Encapsulation (MPE) protocol is enabled on the device and selects its operating mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1429.2.2.5.39.7
snmpwalk -v2c -c public <target> CISCO-DMN-DSG-PROTOCOLS-MIB::protocolsCtrlMPE

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1429.2.2.5.39.7.1
snmpget -v2c -c public <target> CISCO-DMN-DSG-PROTOCOLS-MIB::protocolsCtrlMPE.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1429.2.2.5.39.7.1 i <value>

Start monitoring Cisco DMN D9800 digital satellite gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DMN-DSG-PROTOCOLS-MIB::protocolsCtrlMPE OID value, configure state conditions and alerts, and monitor any Cisco DMN D9800 digital satellite gateway from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1429ciscoSPVTGCISCO-DMN-DSG-ROOT-MIB
1.3.6.1.4.1.1429.2ciscoSatCISCO-DMN-DSG-ROOT-MIB
1.3.6.1.4.1.1429.2.2ciscoDMNCISCO-DMN-DSG-ROOT-MIB
1.3.6.1.4.1.1429.2.2.5ciscoDSGUtilitiesCISCO-DMN-DSG-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1429.2.2.5.39ciscoDSGProtocolsCISCO-DMN-DSG-PROTOCOLS-MIB
1.3.6.1.4.1.1429.2.2.5.39.7protocolsCtrlMPECISCO-DMN-DSG-PROTOCOLS-MIB