All MIBs › CISCO-DIAMETER-BASE-PROTOCOL-MIB › cdbpRedundancyInfraState
cdbpRedundancyInfraState
Module: CISCO-DIAMETER-BASE-PROTOCOL-MIB
OID (symbolic): CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpRedundancyInfraState
OID (numeric): 1.3.6.1.4.1.9.10.133.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This parameter indicates the current state of cisco redundancy infrastructure state. rfUnknown(0) - unknown state rfDisabled(1) - RF is not functioning at this time rfInitialization(2) - co-ordinating init with platform rfNegotiation(3) - initial negotiation with peer to determine active-standby rfStandbyCold(4) - peer is active, we're cold rfStandbyConfig(5) - sync config from active to standby rfStandbyFileSys(6) - sync file sys from active to standby rfStandbyBulk(7) - clients bulk sync from active to standby rfStandbyHot(8) - standby ready-n-able to be active rfActiveFast(9) - immediate notification of standby going active rfActiveDrain(10) - drain queued messages from peer rfActivePreconfig(11) - active and before config rfActivePostconfig(12) - active and post config rfActive(13) - actively processing new calls rfActiveExtraload(14) - actively processing new calls extra resources other Processing is failed and I have extra load.
What is cdbpRedundancyInfraState?
Reports the current state of the Cisco redundancy framework infrastructure, such as unknown, disabled, or in initialization, for the Diameter process.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.133.1.1.8 snmpwalk -v2c -c public <target> CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpRedundancyInfraState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.133.1.1.8.1 snmpget -v2c -c public <target> CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpRedundancyInfraState.1
Start monitoring Cisco Diameter-capable network element (e.g. PDSN/AAA gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpRedundancyInfraState OID value, configure state conditions and alerts, and monitor any Cisco Diameter-capable network element (e.g. PDSN/AAA gateway) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.133 | ciscoDiameterBasePMIB | CISCO-DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.10.133.1 | ciscoDiameterBasePMIBObjects | CISCO-DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.10.133.1.1 | cdbpLocalCfgs | CISCO-DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.10.133.1.1.8 | cdbpRedundancyInfraState | CISCO-DIAMETER-BASE-PROTOCOL-MIB |