CISCO-DHCP-SNOOPING-MIB :: cdsIfSrcGuardVlansLow

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-DHCP-SNOOPING-MIB › cdsIfSrcGuardVlansLow

cdsIfSrcGuardVlansLow

Module: CISCO-DHCP-SNOOPING-MIB

OID (symbolic): CISCO-DHCP-SNOOPING-MIB::cdsIfSrcGuardVlansLow

OID (numeric): 1.3.6.1.4.1.9.9.380.1.6.2.1.8

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet.

For each VLAN, if Source Guard feature is enabled then the bit corresponding to that VLAN is set to '1'.

Note that if the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value zero. A NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs.

What is cdsIfSrcGuardVlansLow?

A bitmap indicating which VLANs (index 0-2047) have IP Source Guard enabled on this interface, one bit per VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.380.1.6.2.1.8
snmpwalk -v2c -c public <target> CISCO-DHCP-SNOOPING-MIB::cdsIfSrcGuardVlansLow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.380.1.6.2.1.8.1
snmpget -v2c -c public <target> CISCO-DHCP-SNOOPING-MIB::cdsIfSrcGuardVlansLow.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cdsIfSrcGuardVlansLow.1

Start monitoring Cisco Catalyst/IOS-XE switches (DHCP snooping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DHCP-SNOOPING-MIB::cdsIfSrcGuardVlansLow OID value, configure state conditions and alerts, and monitor any Cisco Catalyst/IOS-XE switches (DHCP snooping) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.380ciscoDhcpSnoopingMIBCISCO-DHCP-SNOOPING-MIB
1.3.6.1.4.1.9.9.380.1ciscoDhcpSnoopingMIBObjectsCISCO-DHCP-SNOOPING-MIB
1.3.6.1.4.1.9.9.380.1.6cdsSrcGuardCISCO-DHCP-SNOOPING-MIB
1.3.6.1.4.1.9.9.380.1.6.2cdsIfSrcGuardAddrTableCISCO-DHCP-SNOOPING-MIB
1.3.6.1.4.1.9.9.380.1.6.2.1cdsIfSrcGuardAddrEntryCISCO-DHCP-SNOOPING-MIB
1.3.6.1.4.1.9.9.380.1.6.2.1.8cdsIfSrcGuardVlansLowCISCO-DHCP-SNOOPING-MIB