All MIBs › CISCO-CONTENT-SERVICES-MIB › ccsNetServerResponseTimeFailClearThreshold
ccsNetServerResponseTimeFailClearThreshold
Module: CISCO-CONTENT-SERVICES-MIB
OID (symbolic): CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseTimeFailClearThreshold
OID (numeric): 1.3.6.1.4.1.9.9.597.1.1.1.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the clear threshold associated with ccsNetServerResponseTimeFailAlarmThreshold. If ccsAdControlNotifEnabled is set to 'true', the count (ccsNetServerResponseTimeFailCountNotifInfo) is equal to or lower than the threshold when the timer (ccsAdControlAlarmUpdateTimer) expires and the alarm specified by ciscoContentServicesNetServerResponseTimeExceeded exists, the clear notification specified by ciscoContentServicesNetServerResponseTimeAlarmCleared is generated. The threshold should be less than the alarm threshold specified by ccsNetServerResponseTimeFailAlarmThreshold. When the threshold is changed, the counter will be reset, the alarm will be cleared, and the timer will be re-started.
What is ccsNetServerResponseTimeFailClearThreshold?
A read-write threshold that clears the associated response-time-fail alarm once the count of slow responses falls to or below this level within the monitoring interval.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.597.1.1.1.1.10 snmpwalk -v2c -c public <target> CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseTimeFailClearThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.597.1.1.1.1.10.1 snmpget -v2c -c public <target> CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseTimeFailClearThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.597.1.1.1.1.10.1 i <value>
Start monitoring Cisco Content Services switch (CSS/CSM-class device) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseTimeFailClearThreshold OID value, configure state conditions and alerts, and monitor any Cisco Content Services switch (CSS/CSM-class device) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.597 | ciscoContentServicesMIB | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1 | ciscoContentServicesMIBObjects | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1 | ccsConfig | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1.1 | ccsGlobalCfgTable | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1.1.1 | ccsGlobalCfgTableEntry | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1.1.1.10 | ccsNetServerResponseTimeFailClearThreshold | CISCO-CONTENT-SERVICES-MIB |