All MIBs › CISCO-CONTENT-SERVICES-MIB › ccsNetServerResponseFailClearThreshold
ccsNetServerResponseFailClearThreshold
Module: CISCO-CONTENT-SERVICES-MIB
OID (symbolic): CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseFailClearThreshold
OID (numeric): 1.3.6.1.4.1.9.9.597.1.1.1.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the clear threshold associated with ccsNetServerResponseFailAlarmThreshold. If ccsAdControlNotifEnabled is set to 'true', the count (ccsNetServerResponseFailCountNotifInfo) is equal to or lower than the threshold when the timer (ccsAlarmUpdateTimer) expires and the alarm specified by ciscoContentServicesNetServerResponseFailExceeded exists, the clear notification specified by ciscoContentServicesNetServerResponseFailAlarmCleared is generated. The threshold should be less than the alarm threshold specified by ccsNetServerResponseFailAlarmThreshold. When the threshold is changed, the counter will be reset, the alarm will be cleared if exists, and the timer will be re-started.
What is ccsNetServerResponseFailClearThreshold?
A read-write threshold that, once the failed-response count drops to or below this level within the monitoring interval, causes the previously raised alarm to be cleared.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.597.1.1.1.1.7 snmpwalk -v2c -c public <target> CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseFailClearThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.597.1.1.1.1.7.1 snmpget -v2c -c public <target> CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseFailClearThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.597.1.1.1.1.7.1 i <value>
Start monitoring Cisco Content Services switch (CSS/CSM-class device) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CONTENT-SERVICES-MIB::ccsNetServerResponseFailClearThreshold OID value, configure state conditions and alerts, and monitor any Cisco Content Services switch (CSS/CSM-class device) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.597 | ciscoContentServicesMIB | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1 | ciscoContentServicesMIBObjects | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1 | ccsConfig | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1.1 | ccsGlobalCfgTable | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1.1.1 | ccsGlobalCfgTableEntry | CISCO-CONTENT-SERVICES-MIB |
| 1.3.6.1.4.1.9.9.597.1.1.1.1.7 | ccsNetServerResponseFailClearThreshold | CISCO-CONTENT-SERVICES-MIB |