All MIBs › CISCO-CNO-SWITCH-MIB › cnosSysConfigReset
cnosSysConfigReset
Module: CISCO-CNO-SWITCH-MIB
OID (symbolic): CISCO-CNO-SWITCH-MIB::cnosSysConfigReset
OID (numeric): 1.3.6.1.4.1.9.10.43.1.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to reset(2) causes a complete reset of both hardware and software, but does not run the POST (Power On Self Test).
Setting this object to noReset(1) has no effect. The switch always returns the value noReset(1) when this object is read.
What is cnosSysConfigReset?
A writable control that, when set to reset(2), triggers a full hardware and software reset (without POST); setting it to noReset(1) has no effect, and the switch always reads back noReset(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.43.1.2.1 snmpwalk -v2c -c public <target> CISCO-CNO-SWITCH-MIB::cnosSysConfigReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.43.1.2.1.1 snmpget -v2c -c public <target> CISCO-CNO-SWITCH-MIB::cnosSysConfigReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.43.1.2.1.1 i <value>
Start monitoring Cisco Network Office (CNO) switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CNO-SWITCH-MIB::cnosSysConfigReset OID value, configure state conditions and alerts, and monitor any Cisco Network Office (CNO) switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.43 | ciscoCNOSwitchMIB | CISCO-CNO-SWITCH-MIB |
| 1.3.6.1.4.1.9.10.43.1 | ciscoCNOSwitchMIBObjects | CISCO-CNO-SWITCH-MIB |
| 1.3.6.1.4.1.9.10.43.1.2 | cnosSysConfig | CISCO-CNO-SWITCH-MIB |
| 1.3.6.1.4.1.9.10.43.1.2.1 | cnosSysConfigReset | CISCO-CNO-SWITCH-MIB |