CISCO-CNO-SWITCH-MIB :: cnosSysConfigMonitorPort

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-CNO-SWITCH-MIB › cnosSysConfigMonitorPort

cnosSysConfigMonitorPort

Module: CISCO-CNO-SWITCH-MIB

OID (symbolic): CISCO-CNO-SWITCH-MIB::cnosSysConfigMonitorPort

OID (numeric): 1.3.6.1.4.1.9.10.43.1.2.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Port number to which all frames to/from monitored ports are sent. Frames are only monitored if the sysConfigMonitor object is set to enabled(1).

A number from 1 to 8 selects a switch port. The number 0 selects no monitor port.

What is cnosSysConfigMonitorPort?

Read-write setting that identifies which switch port (1-8, or 0 for none) receives the mirrored traffic from monitored ports when port monitoring is enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.43.1.2.4
snmpwalk -v2c -c public <target> CISCO-CNO-SWITCH-MIB::cnosSysConfigMonitorPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.43.1.2.4.1
snmpget -v2c -c public <target> CISCO-CNO-SWITCH-MIB::cnosSysConfigMonitorPort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.43.1.2.4.1 i <value>

Start monitoring Cisco Network Office (CNO) switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CNO-SWITCH-MIB::cnosSysConfigMonitorPort OID value, configure state conditions and alerts, and monitor any Cisco Network Office (CNO) switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.43ciscoCNOSwitchMIBCISCO-CNO-SWITCH-MIB
1.3.6.1.4.1.9.10.43.1ciscoCNOSwitchMIBObjectsCISCO-CNO-SWITCH-MIB
1.3.6.1.4.1.9.10.43.1.2cnosSysConfigCISCO-CNO-SWITCH-MIB
1.3.6.1.4.1.9.10.43.1.2.4cnosSysConfigMonitorPortCISCO-CNO-SWITCH-MIB