CISCO-CAT6K-CROSSBAR-MIB :: cc6kxbarFlowCtrlBusFIFOThrMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-CAT6K-CROSSBAR-MIBcc6kxbarFlowCtrlBusFIFOThrMode

cc6kxbarFlowCtrlBusFIFOThrMode

Module: CISCO-CAT6K-CROSSBAR-MIB

OID (symbolic): CISCO-CAT6K-CROSSBAR-MIB::cc6kxbarFlowCtrlBusFIFOThrMode

OID (numeric): 1.3.6.1.4.1.9.9.217.1.6.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the mode configuration of the system bus flow control FIFO threshold.

off -- the flow control FIFO threshold is set to the original value defined by the system.

on -- the flow control FIFO threshold is set to the lower value defined by the system.

auto -- the system starts monitoring the system bus flow control FIFO threshold and will change the flow control FIFO threshold from the original value to the lower value when the system detects the first occurrence of the threshold exceeding on a physical entity (such as a module) over the system allowed limit.

What is cc6kxbarFlowCtrlBusFIFOThrMode?

A read-write setting that selects whether the system bus flow-control FIFO threshold uses its original default value (off) or a lower configured value (on).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.217.1.6.2
snmpwalk -v2c -c public <target> CISCO-CAT6K-CROSSBAR-MIB::cc6kxbarFlowCtrlBusFIFOThrMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.217.1.6.2.1
snmpget -v2c -c public <target> CISCO-CAT6K-CROSSBAR-MIB::cc6kxbarFlowCtrlBusFIFOThrMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.217.1.6.2.1 i <value>

Start monitoring Cisco Catalyst 6000/6500 series switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CAT6K-CROSSBAR-MIB::cc6kxbarFlowCtrlBusFIFOThrMode OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 6000/6500 series switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.217ciscoCat6kCrossbarMIBCISCO-CAT6K-CROSSBAR-MIB
1.3.6.1.4.1.9.9.217.1ciscoCat6kXbarMIBObjectsCISCO-CAT6K-CROSSBAR-MIB
1.3.6.1.4.1.9.9.217.1.6cc6kxbarFlowCtrlObjectsCISCO-CAT6K-CROSSBAR-MIB
1.3.6.1.4.1.9.9.217.1.6.2cc6kxbarFlowCtrlBusFIFOThrModeCISCO-CAT6K-CROSSBAR-MIB